Bench Multimeters

• View measurements easily on high contrast OLED display
• Simplify data analysis with the built-in histogram and basic statistical functions
• Perform data logging productively with up to 50,000 memory points
• Speed up testing with Keysight BenchVue – no programming required
• Flexibly automate measurements over USB

• Histogram and bar chart on 4.3-inch color graphical display ease monitoring and speed up statistical analysis
• Measure with confidence, with 75 ppm basic DCV accuracy
• Test low power devices with low DC current measurement range from 100 µA to 3 A
• Speed up testing with Keysight BenchVue – no programming required

• Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis
• Measure with confidence, with 35 ppm basic DCV accuracy
• Test low power devices with low DC current measurement range from 100 µA to 10 A
• Speed up testing with Keysight BenchVue – no programming required
• Flexibly automate measurements over USB or LAN/LXI core interface
• Migrate with confidence from legacy model 34401A

5.5 Digit Precision Multimeter SW & Cable

• Auto-ranging digital multimeter measures current, voltage, resistance, and frequency
• True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
• Dual LCD shows two readings at once
• Includes ISO 17025 Accredited Certificate of Calibration to ensure accuracy
• Meets IEC safety standard 61010:2001; ANSI/ISA 61010-1 (S82.02.01):2004; UL 61010-1A1; CSA C22.2 No. 61010.1:2004

• Get the convenience of having a full-featured 120,000 counts resolution DMM and a 30 W DC power supply in one box
• Multimeter: 10 measurement functions including 4-wire milliohm, 8 math functions, up to 0.025% basic DCV accuracy
• DC power supply: 30 V/1A, 100 mA/30 V, 8 V/3 A, 1,000 mV/3 A, excellent line/load regulation up to 0.01%+3 mV, OVP and OCP load protection, auto ramp and scan, square-wave output
• Securable via Kensington lock

• Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis
• Measure with confidence, with 30 ppm basic DCV accuracy
• Test low power devices with 1 µA range and pA resolution
• Speed up testing with Keysight BenchVue – no programming required
• Flexibly automate measurements over USB or LAN/LXI core interface
• Digitizing and advanced triggering (DIG) now included

6.5 Digit Precision Multimeter, 35ppm(Software & Cable),120V

• 6.5 digit resolution
• Basic V dc accuracy of up to 0.0024 %
• Dual display
• 100 µA to 10 A current range, with up to 100 pA resolution
• Wide ohms range from 10 ohm to 1 Gohm with up to 10 µohm resolution
• 2 x 4 ohms 4-wire measurement technique
• Both models measure frequency and period
• 8846A also measures capacitance and temperature
• USB memory drive port
• Fluke 45 and Agilent 34401A emulation
• Graphical display
• Trendplot™ paperless recorder mode, statistics, histogram
• CAT I 1000 V, CAT II 600 V

6.5 digit Precision Multimeter, 24ppm,USB mem.,120V

• 6.5 Digit Resolution
• Graphical Display
• Basic V dc Accuracy of up to 0.0025%
• 10 mA to 10 A Current
• 10 Ohm to 1 GOhm Resistance
• 2x4 Wire Ohms Measurement Technique
• Frequency, Period, Capacitance & RTD Temperature Measurements
• Analytical Modes; TrendPlot™, Histogram and Statistics
• USB Device Port, for Memory Storage Devices
• RS-232, IEEE-488 and Lan Interfaces
• Popular DMM Emulation Modes

• Histogram, bar and trend charts on 4.3-inch color graphical display ease monitoring and speed up statistical analysis
• Measure with confidence, with high basic DCV accuracy of 16 ppm
• Test low power devices with 1 µA range and pA resolution
• Speed up testing with Keysight BenchVue – no programming required
• Flexibly automate measurements over USB or LAN/LXI core interface
• Digitizing and advanced triggering (DIG) now included