Network & Telecom

Items 1 to 20 of 27 total

per page

  1. 1
  2. 2
  • Fluke Networks Pocket Toner

    The Pocket Toner® connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage* and dial tone* all while protecting up to 52 volts.

    The Pocket Toner comes in three models and several different kit configurations so no matter what your job, you can safely install and test.

    • Low-voltage circuit protection for both the unit as well as the detachable cable toner
    • Dual audible indicators in the main body and detachable buzzer toner units
    • Removable push on connectors
    • Auto shut-off
    • Easy-to-read indicators
    • Male and female adaptable toner section
    • Removable push-on connector
    • Lightweight, durable anodized aluminum body
    Learn More
  • Fluke Networks Pro3000 Tone and Probe

    Pro3000 Series Tone & Probe Kits tone and trace inactive wiring.

    Stop the Buzz. Find Cables Faster with Clear, Precise Toning

    • Clear - Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
    • Precise – SmartTone technology provides five distinct tones for exact pair identification
    • Sends loud tone up to 10 miles (16 kilometers) on most cables
    • Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
    • Angled bed-of-nails clips allow easy access to individual pairs
    • RJ-11 connector is ideal for use on telephone jacks
    • Attach nylon pouch (included in kit) to your belt for easy transport
    Learn More
  • Fluke Networks MT-8200-49A MicroMapper Wiremap Tester

    Simple verification tester verifies wiremap and identifies faults with LEDs.

    • Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs
    • Network cable mapper with easy-to-read fault display
    • Tone generator for tracing installed cables hidden in walls, floors and ceilings
    • Remote unit enables one-person testing of installed cables
    Learn More

  • Fluke Networks TS 19 Test Sets

    TS19 telephone test equipment features DataSafe™, Tone or Pulse operation, Talk/Monitor capabilities and last number redial.

    • High impedance DataSafeTM operation in monitor mode
    • Tone (DTMF) and pulse operation
    • Last number redial
    • Polarity indication in talk mode
    Learn More
  • Fluke Networks IntelliTone Pro 200 LAN Toner, Tracer and Probe

    Digital network cable toner and probe traces and locates cables on active network.

    IntelliTone digital toning technology:

    • Ends network cable location confusion, decisively rejects noise and false signals
    • Network cable tracer locates cables on active networks, even when terminated at a switch
    • Isolates cable and wiring within a bundle, despite cable bleed
    • Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
    • Probe has built-in pair tester to identify open, shorted and crossed pairs
    • Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables

    SmartTone® analog toning technology:

    • Isolates individual wire pairs precisely by changing tone when shorted
    • Effectively traces and locates voice, audio, and video cabling
    Learn More
  • Fluke Networks Voltage Detector

    Easy-to-use handheld probe high voltage detector. Provides protection against hazardous voltages.

    • Helps protect against accidental electrocution
    • Is fast and easy to use. Handy as a flashlight
    • Assists with OSHA compliance
    Learn More
  • Fluke Networks TS 90 Cable Fault Finder

    An easy-to-use fault locator, cable and wire manager and tone generator.
    • Works on any two or more conductor cable up to 2,500 feet (762 meters)
    • Instantly measures distance to open or any fault from one end of any cable pair
    • Patented SmartTone® tone generator positively identifies pair
    • Measures cable distance on spool
    • Measures constantly while 'on'
    • Displays distance reading rather than waveform
    • Large LED screen
    • High voltage detection
    • Moisture proof
    • One-button operation
    • Additional line cord options available for coaxial cable (F-connectors) and other applications
    Learn More

  • Fluke Networks Electrical Contractor Telecom Kits

    These handy telecom installer tool kits contain essential industry standard telecommunications tools and test equipment.

    • Choose either Telecom Installer Kit I with TS®30 Test Set or Telecom Installer Kit II with Pro3000 Analog Tone & Probe
    • D814 industry standard punchdown tool for reliable terminations
    • EverSharp 66/110 cut blade provides flexibility for different block and jack terminations
    • Cable Stripper quickly rings and slits many types of cable
    • Use the Probe Pic to check for loose or damaged connections
    • Cut and strip wire cleaner and faster with the Electricians D-Snips
    • Connect to jacks for testing with the standard 4-Wire Modular Adapter
    • A soft zippered pouch keeps your telecom installer tools all in one convenient place
    Learn More
  • Fluke Networks TS 25D Test Sets

    The TS25D telephone tester features data lockout and lockout override, and a large LCD.

    • Caller-ID and Call Waiting Caller-ID
    • Amplified speakers for hands-free monitoring
    • Data lockout and data lockout override
    • Tone generator for wire identification
    • Talk battery to power voice conversation on dry (non-powered) lines
    • Easy to read oversized liquid crystal display
    Learn More
  • Fluke Networks TS 30 Test Sets

    The TS30 features the latest in telephone test set case design, at an affordable price.

    • High impedance DataSafeTM operation in monitor mode
    • DropSafeTM reliability passes 20-foot drop test
    • RainSafeTM protection in severe weather conditions
    • Mute switch
    • Last number redial
    • Audible ringer for callbacks
    Learn More
  • Fluke Networks TS 22 Series Test Sets

    The TS22 Series telephone test equipment offers a combination of reliability, durability and expanded utility.

    • TS22 Test Set has an amplified speaker for hands-free monitoring
    • TS22A Test Set has a two-way speakerphone for true hands-free conversation
    • DropSafeTM reliability passes 20-foot drop test
    • RainSafeTM protection in severe weather conditions
    • Stores nine 18-digit numbers in repertory dialer (speed dialing)
    Learn More
  • Fluke Networks TS 100 Cable Fault Finder

    An easy-to-use cable fault locator, cable and wire manager and tone generator.
    • Works on any two or more conductor cable up to 3,000 feet (915 meters)
    • Instantly measures distance to open or any fault from one end of any cable pair
    • Patented SmartToneTM tone generator positively identifies pair
    • Measures cable distance on spool
    • Measures constantly while 'On'
    • Displays distance reading rather than waveform
    • Large bright LED screen
    • One button operation
    • High voltage detection
    • Moisture proof
    • Additional line cord options available for coaxial cable (F-connectors) and other applications
    Learn More

  • Fluke Networks VisiFault Visual Fault Locator - Cable Continuity Tester

    Visual fault locator cable continuity tester locates fibers, finds faults, verifies continuity and polarity.

    • Locates visual faults including tight bends, breaks and bad connectors
    • Accelerates end-to-end fiber checks
    • Easily verifies polarity and identifies fibers
    • Features continuous and flashing modes
    • Ergonomic case survives drops, impacts and vibrations
    • Supports 2.5 mm and 1.25 mm SFF connectors
    • Over 80 hours of battery life with two AA batteries
    Learn More

  • Fluke Networks TS 52 PRO Test Sets

    The TS52 PRO telephone Test Set features backlit LCD and glow-in-the-dark keypad.

    • Display—backlit LCD and glow-in-the-the dark keypad
    • DataSafe Pro—superior high-impedance monitoring, lockout and override, making you completely safe in any mode
    • DropSafe—passes 20-foot drop test
    • DSL/POTS Filtering Technology—allows technicians to clip on a live DSL line to test POTS service without downing or disrupting data service
    • RainSafe–designed for use in rain conditions.
    • 2-way hands-free speakerphone—for true hands-free conversation
    • Test Functions
      • Data indication—warns when data is present.
      • Voltage indication—troubleshooting feature to identify potential line problems
      • Current (mA) indication—verifies sufficient line current
      • Caller-ID—verifies service is functional
      • DTMF Digit Grabbing—isolate faulty customer premise equipment
    Learn More
  • Fluke Networks MicroScanner Cable Verifier

    • Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
    • Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
    • IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
    • VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
    • Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
    • Magnetic Strap (included in MicroScanner kits) - Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet
    Learn More
  • Fluke Networks TS 54 TDR Test Set

    A three-in-one—TDR, toner and pair identifier—premium, VDV telephone test set

    Ten testing functions include:

    • TDR – find cable length measurement and locate faults on virtually all types of cable including twisted pair, coaxial, and parallel conductors
    • Toner – five separate tones for fast and easy differentiation between multiple wire pairs
    • SmartTone® – short the correct pair and tone changes for exact pair identification
    • Data indication – warns when data is present on the line
    • Voltage indication/measurement – identifies potential line problems
    • Current (mA) indication/measurement – verifies sufficient line current
    • Caller-ID with Call Waiting CID – verifies functional service
    • DTMF Digit Grabbing – isolates faulty customer premise equipment
    • Detects dial tone, places and receives calls
    • Polarity
    Learn More
  • Fluke Networks TS 100 PRO Cable Fault Finder with PowerBT™ Bridge Tap

    Bridge tap detection at the touch of a button.

    • Reports distance to multiple bridge taps up to 3,200 feet (975 metres)
    • Tests opens and shorts up to 8,000 feet (2.4 kilometres)
    • Patented SmartTone for exact pair identification
    • Built-in TDR and toner
    • AC/DC voltage detection
    • One-button testing
    Learn More

  • Fluke Networks SimpliFiber Pro Optical Power Meter and Fiber Test Kits

    • Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
    • Additional wavelengths of 1490 and 1625 nm
    • CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
    • FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
    • Min/Max capability automates precision tracking of intermittent power fluctuations
    • Large internal memory save 1000 results which enables continuous testing and recording
    Learn More
  • Fluke Networks CableIQ Qualification Tester

    Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP).

    • Works on live networks to provide Ethernet switch detection and device configuration
    • Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
    • Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
    • Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
    • Tests all copper cabling media: twisted-pair, coax, and audio
    • Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
    Learn More
  • Fluke Networks Fiber QuickMap Multimode Fault Finder

    Multimode Fiber Distance and Fault Locator

    • Works on multimode fiber, 50/125µm and 62.5/125 µm
    • 850 nm output wavelength. Measure up to 4,921 feet (1,500 metres) of fiber in seconds
    • Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber
    • Measure and locate high-loss splices
    • Locate the end of a fiber
    • Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
    • Detects live optical signals before it begins testing
    • Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
    • Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
    • Change the Index of Refraction (IOR) to improve fiber length accuracy
    • Visible in dark areas. Backlighted display turns off automatically
    • Removable SC adapter is easily cleaned
    • Optional LC, ST and FT interchangeable adapters are available
    • Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
    • Rugged construction; vibration and drop tested to 1 meter
    Learn More

Items 1 to 20 of 27 total

per page

  1. 1
  2. 2