You have no items in your shopping cart.
Pulse Generators
-
Keysight 81150A Pulse Function Arbitrary Noise Generator
Learn More- 1µ - 120 MHz pulse generation with variable rise/fall time
- 1µ - 240 MHz sine waveform output
- 14-bit, 2 GSa/s arbitrary waveforms
- 512k samples deep arbitrary waveform memory per channel
- Noise with a selectable crest factor and signal repetition time of 26 days
- FM, AM, PW, PWM, FSK modulation capabilities up to 10 MHz
- 1 or 2 channel, coupled and uncoupled
- Differential outputs
-
Keysight 81160A Pulse Function Arbitrary Noise Generator
Learn More- Generation of 330-MHz pulses and 500-MHz function/arbitrary waveforms with a 2.5-GSa/s sample rate and 14-bit vertical resolution;
- Selectable crest factors for white Gaussian noise lets engineers determine how much distortion to apply to a device during stress testing to meet various serial bus standards;
- Glitch-free timing parameter changes allow engineers to change the frequency without drop-outs or glitches and enable continuous operation without rebooting or resetting the device under test; and
- Arbitrary bit patterns show capacitive load of the channels using simple pattern settings. Complex measurement setups are no longer necessary to test designs to their limits.
- Pulses 330 MHz, 500 MHz sine waves, 660 Mbit pattern
-
Keysight 81133A Pulse Pattern Generator, 3.35 GHz, single channel
Learn More- Frequency range from 15 MHz - 3.35 GHz
- Single output channel
- Low jitter
- Fast rise times (20%-80%) < 60 ps
- Delay modulation (jitter emulation)
- Variable cross-over point (eye deformation)
- LVDS applications can be addressed with output levels from 50 mV to 2 V
- PRBS from 25-1 to 231-1
- 12 MBit data pattern memory, RZ, NRZ, R1 modes
- 8 kBit data Burst capability
- Graphical User Interface
- PC-based Pattern Management Tool
- Remote control via GPIB, 10/100 MBit Ethernet and USB 2.0
- SMA connectors for all inputs & outputs
-
Keysight 81134A Pulse Pattern Generator, 3.35 GHz, dual-channel
Learn More- Frequency range from 15 MHz - 3.35 GHz
- Two ouput channels
- Low jitter
- Fast rise times (20%-80%) < 60 ps
- Delay modulation (jitter emulation)
- Variable cross-over point (eye deformation) LVDS applications can be addressed with output levels from 50 mV to 2 V Pre-/de-emphasis and squelch levels for PCI Express and serial ATA
- LVDS applications can be addressed with output levels from 50 mV to 2 V
- Pre-/de-emphasis and squelch levels for PCI Express and serial ATA
